 
** Images may not represent the actual product for sale. Please read product descriptions before placing your order.
|
Payments Accepted |
Mastercard, VISA, Discover, American Express, and PayPal
 |
Keenzo also accepts
Purchase Orders from Qualified Businesses and Organizations.
Apply Here |
| Shipping |
Based on product size and your location, Keenzo will choose from Fedex, UPS, DHL and USPS.
Large items may ship via LTL.
 |
| Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger - Input Voltage:12V DC - , 230V AC - Output Voltage:230V AC, 12V DC - 750W Pulse-width Modulated Sine Wave
Manufacturer: TRIPP LITE
Part#: APSX750
Pkg Size: 10.75 X 10.75 X 11.75
Product Condition: Brand New, Full Warranty
UPC: 37332121622
|
$291.97
MSRP $414.00
You Save (29.5%) $122.03| Shipping |  | $22.33 |
|
|
Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or
| Specifications | | General Information | | Manufacturer | Tripp Lite | | Manufacturer Part Number | APSX750 | | Manufacturer Website Address | www.tripplite.com | | | www.tripplite.com | | Product Line | PowerVerter | | Product Series | APS X | | Product Model | APSX750 | | Product Type | Power Inverter | | Technical Information | | Plug/Connector Type | IEC 320 EN 60320 C14 | | Receptacles | 2 x IEC 320 EN 60320 C13 | | Status Indicators | Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported) | | Power Description | | Input Voltage | 12V DC | | | 230V AC | | Input Voltage Range | 10 to 15 V DC | | Output Voltage | 230V AC ±5% Nominal | | | 12V DC Nominal | | Frequency | 50 Hz ±0.3Hz | | Input Current | 72 A @ 12V DC | | | 6.2 A @ 230V AC | | Load Capacity | 750W Continuous Power / 1500W Peak Power | | Waveform Type | Pulse-width Modulated Sine Wave | | Switching Time | 6 ms | | Environmental Conditions | | Temperature | 32 °F (0 °C) to 104 °F (40 °C) Operating | | Humidity | 0% to 95% Non-condensing Relative Humidity Operating | | Physical Characteristics | | Color | Black | | Power Cord/Cable | 6ft Input | | Dimensions | 9" Height x 8.75" Width x 9" Depth | | Shipping Dimensions | 12.5" Height x 11" Width x 10.75" Depth | | Weight | 18.6 lb | | Shipping Weight | 20 lb | | Miscellaneous | | Additional Information | Frequency control for operating stabilityRJ45 port allows connection of APS/PowerVerter Remote SwitchSwitch allows user to select between off, auto-invert and charge-only settings Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteriesCoated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backupLow voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201VOverload protection: Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loadsDC Input Voltage: 12 VDCAC Input Voltage: 230 VACDC Charger Output Voltage: 12 VDCAC Output Voltage: 230 VAC AC Plug Type: IEC-320 C14 DC Plug Type: Set of 2 DC bolt-down terminalsOutlet/Receptacle Type: IEC-320 C13 | | Package Contents | PowerVerter APS X APSX750 Power Inverter/ChargerInstruction manual with warranty information User supplies batteries and cabling | | Compatibility | Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications |
|
|
|
|
| The TRIPP LITE APSX750 has not yet been reviewed. You can be the first to Create an Online Review for this product and share your experiences with other customers! |
|
|
| |
|
| This page contains information (descriptions, images, and specifications) obtained by KEENZO from manufacturers and other industry sources believed to be reliable. KEENZO makes no warranties or representations with respect to the performance of the products or accuracy of the information. Any and all warranties, whether written or oral, expressed or implied, are hereby expressly disclaimed by KEENZO, including, but not limited to, warranties of merchantability and fitness for a particular purpose and liability arising from errors and omissions in the information. It is your sole responsibility to evaluate the accuracy of, completeness, and usefulness of the information. If you feel the information for TRIPP LITE APSX750 may be incorrect, please
click here to let us know (The page will simply refresh).
|
| |
( 0
